Publications - IPF Research, Ingeniería de Procesos de Fabricación de la Universidad de Oviedo

In‑situ digitising system for geometric improvement of layer contours in additive manufacturing

F. PeÃ±a, P. Zapico, G. ValiÃ±o, J.C. Rico,Â S. Mateos. A. FernÃ¡ndez

Progress in Additive Manufacturing, On-line, 2025

doi:10.1007/s40964-025-01169-3

Category: JCR

Related Project: DPI2017-83068-P

Articles

Layer contour geometric characterization in MEX/P through CIS-based adaptive edge detection

A. FernÃ¡ndez; D. Blanco; B.J. Ãlvarez; P. FernÃ¡ndez; P. Zapico; G. ValiÃ±o

Applied Sciences, 14, 6163, 2024

doi: https://doi.org/10.3390/app14146163

Category: JCR

Related Project: DPI2017-83068-P

A layerwise geometric error compensation procedure for Additive Manufacturing

F. Peña, J.C. Rico, P. Zapico, G. Valiño, S. Mateos

Rapid Prototyping Journal, 30(3), 490-501, 2024

doi:10.1108/RPJ-04-2023-0144

Category:JCR

Related Project:DPI2017-83068-P

File download: 10-1108_rpj-04-2023-0144.pdf

Optical characterisation of materials for precision reference spheres for use with structured light sensors

P. Zapico, V.M. Meana, E. Cuesta, G., S. Mateos

Materials, 16(15), 5443, 2023

doi:10.3390/ma16155443

Category:JCR

Characterisation of the performance of a structural light digitizing sensor by using different materials and surface finishes

P. Zapico, E. Cuesta, V.M. Meana, G. Suárez, S. Mateos, P. Rodríguez

Key Engineering Materials, 961, 151-159, 2023

doi:10.4028/p-Y4fJ1Z

Category: JCR

Virtual-point based geometric error compensation model for additive manufacturing machines

P. Zapico; F. Peña; G. Valiño; J. C. Rico; V. M. Meana; S. Mateos

Rapid Prototyping Journal, 29(4), 837-849, 2023

doi:10.1108/RPJ-02-2022-0052

Category: JCR

Related Project: DPI2017-83068-P

File download: 2023_rapid_prototyping_[virtual-point_baesd_geometric][pag.1
].pdf

Influence of post-processing on the properties of multi-material parts obtained by Material Projection AM

P. Zapico, P. Rodríguez-González, P. Robles-Valero, A. I. Fernández-Abia, J. Barreiro

Polymers, 15(9), 2089, 2023

doi:10.3390/polym15092089

Category: JCR

File download: polymers-15-02089-v2.pdf

Comparison of Chemical and Mechanical Surface Treatments on Metallic Precision Spheres for Using as Optical Reference Artifacts

V. Meana; E. Cuesta; B.J. Álvarez; S. Giganto; S. Martínez-Pellitero

Materials, 15:3741, 2022

doi:10.3390/ma15113741

Category: JCR

File download: 2022_materials_[comparison_of_chemical_and_mechanical][pag.1
].pdf

Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

S. Giganto; S. Martinez-Pellitero; E. Cuesta; P. Zapico; J. Barreiro

Rapid Prototyping Journal, 28(6), 1129-1143, 2022

doi:10.1108/RPJ-06-2021-0130

Category: JCR

Conoscopic Holography feasibility for form error in-situ monitoring in Additive Manufacturing

F. Peña; A. Fernández; P. Zapico; G. Valiño; J. C. Rico

IFAC-PapersOnLine, 55 (10), 1031-1036, 2022

doi:10.1016/j.ifacol.2022.09.520

Related Project: DPI2017-83068-P

File download: 2022_ifac_papersonline_[conoscopic_holography_feasibility][p
ag.1].pdf

Novel post-processing procedure to enhance casting molds manufactured by binder jetting AM

P. Rodríguez-González, P. Zapico, P. E. Robles-Valero, J. Barreiro

Additive Manufacturing, 59(A), 103142, 2022

doi:10.1016/j.addma.2022.103142

Category: JCR

File download: 1-s2.0-s2214860422005310-main.pdf

Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact

E. Cuesta; V. Meana; B.J. Álvarez; S. Giganto; S. Martínez-Pellitero

Sensors, 22:8596, 2022

doi:10.3390/s22228596

Category: JCR

File download: 2022_sensors_[metrology_benchmarking_of_3d_scanning][pag.1].
pdf

On-machine non-contact roughness verification system based on Conoscopic holography

Pablo Zapico, Gonzalo Valiño, J. Carlos Rico, Víctor M. Meana, Pedro Fernández

Precision Engineering, 73, 115–127, 2022

doi:10.1016/j.precisioneng.2021.09.004

Category: JCR

Related Project:DPI2017-83068-P

File download: 2022_preciseng_d-21-00147_[on-machine_non-contact_roughness_
verification][page1].pdf

Influence of 17-4PH stainless steel powder recycling on properties of SLM additive manufactured parts

S. Giganto, S. Martínez-Pellitero, J. Barreiro, P. Zapico

Journal of Materials Research and Technology, 16, 1647-1658, 2022

doi:10.1016/j.jmrt.2021.12.089

Category: JCR

File download: 1-s2.0-s2238785421015325-main.pdf

Validation of the sandblasting process in the manufacturing of precision spheres for non-contact metrology

E Cuesta, V Meana, P Pastur, B J Álvarez and P Zapico

IOP Conf. Series: Materials Science and Engineering 1193, 012058, 2021

doi:10.1088/1757-899X/1193/1/012058

File download: 2021_iop_1193_012058_[validation_of_the_sandblasting_process
][page1].pdf

Evaluation of the influence of post-processing on the optical inspection accuracy of additively manufactured parts

S. Giganto; S. Martinez; J. Barreiro; E. Cuesta

IOP Conference Series: Materials Science and Engineering, 1193, 012062, 2021

doi:10.1088/1757-899X/1193/1/012062

File download: 2021_evaluation_of_the_influence_[giganto].pdf

Feasibility analysis of using machinable glass ceramics to manufacture non-contact measurement approach metrological artefacts

P Zapico, B J Alvarez, V Meana, A Telenti and E Cuesta

IOP Conf. Series: Materials Science and Engineering 1193, 012063, 2021

doi:10.1088/1757-899X/1193/1/012063

File download: 2021_iop_1193_012063_[feasibility_analysis_of_using_machinab
le_glass][page1].pdf

Contact Image Sensor integration in Fused Filament Fabrication machines for layer inspection

F Peña, J C Rico, G Valiño, P Fernández, V Meana and P Zapico

IOP Conf. Series: Materials Science and Engineering, 1193, 012091, 2021

doi:10.1088/1757-899X/1193/1/012091

Related Project:DPI2017-83068-P

File download: 2021_iop_1193_012091_[contact_image_sensor_integration][page
1].pdf

Design and construction of a test bench for the manufacture and on-machine non-contact inspection of parts obtained by Fused Filament Fabrication

F Peña, C Fernández, G Valiño, B J Álvarez, J C Rico and S Mateos

IOP Conf. Series: Materials Science and Engineering, 1193, 012090, 2021

doi:10.1088/1757-899X/1193/1/012090

Related Project:DPI2017-83068-P

File download: 2021_iop_1193_012090_[design_and_construction_of_a_test_benc
h][page1].pdf

Layer contour characterization in additive manufacturing through image binarization

D Blanco, A Fernández, P Fernández, B J Álvarez and F Peña

IOP Conf. Series: Materials Science and Engineering,1193, 012067, 2021

doi:10.1088/1757-899X/1193/1/012067

Related Project:DPI2017-83068-P

File download: 2021_iop_1193_012067_[layer_contour_characterization][page1]
.pdf

A procedure to integrate a CIS sensor in an additive manufacturing machine for In-situ digitizing of deposited material layers

Fernando Peña, J. Carlos Rico, Gonzalo Valiño, Pablo Zapico, Víctor M. Meana

IEEE Transactions on Mechatronics

doi:10.1109/TMECH.2021.3121077

Category:JCR

Related Project:DPI2017-83068-P

Testing the Sandblasting Process in the Manufacturing of Reference Spheres for Non-Contact Metrology Applications

Víctor Meana, Eduardo Cuesta and Braulio J. Álvarez

Materials, 14 (18), 5187, 2021

doi: 10.3390/ma14185187

File download: 2021_materials-14-05187_[testing_the_sandblasting_process][p
age1].pdf

Viscoelastic Behaviour of Flexible Thermoplastic Polyurethane Additively-Manufactured Parts: Influence of Inner-Structure Design Factors

P. Fernández, D. Blanco, P. Fernández-Álvarez, J. González, N. Beltrán

Polymers, 13, 2365, 2021

doi:10.3390/polym13142365

Category:JCR

Related Project:DPI2017-83068-P

File download: polymers_2021_13_2365_[viscoelast_beh_am_parts][page_1].pdf

A Design for Additive Manufacturing Strategy for Dimensional and Geometrical Quality Improvement of PolyJet-Manufactured Glossy Cylindrical Features

N. Beltrán, B. J. Álvarez, D. Blanco, F. Peña, P. Fernández

Polymers, 13(7), p. 1132, 2021

doi:10.3390/polym13071132

Category:JCR

Related Project:DPI2017-83068-P

File download: polymers_2021_131_01132_[dfam_dim_quality][page_1].pdf

The Influence of Image Processing and Layer-to-Background Contrast on the Reliability of Flatbed Scanner-Based Characterisation of Additively Manufactured Layer Contours

D. Blanco; P. Fernández; A. Fernández; B. J. Álvarez; J. C. Rico

Applied Sciences, 11(1), p. 178, 2021

doi:10.3390/app11010178

Category:JCR

Related Project:DPI2017-83068-P

File download: appsc_2021_11_178_[image_proc_flatbed_scan_am][page_1].pdf

Estimation and Improvement of the Achievable Tolerance Interval in Material Extrusion Additive Manufacturing through a Multi-State Machine Performance Perspective

N. Beltrán, B. J. Álvarez, D. Blanco, A. Noriega, P. Fernández

Applied Sciences, 11(12), p. 5321, 2021

doi:10.3390/app11125325

Category:JCR

Related Project:DPI2017-83068-P

File download: appsc_2021_11_5321_[estim_improv_tol_am][page_1].pdf

Analysis of Modern Optical Inspection Systems for Parts Manufactured by Selective Laser Melting

Sara Giganto, Susana Martínez-Pellitero, Eduardo Cuesta, Víctor M. Meana and Joaquín Barreiro

Sensors, 20, 3202, 2020

doi:10.3390/s20113202

File download: 2020_sensors-20-03202_[analysis_of_modern_optical_inspection
_systems][page1].pdf

Laser line scanner aptitude for the measurement of Selective Laser Melting parts

E. Cuesta, S. Giganto, B. J. Álvarez, J. Barreiro, S. Martínez-Pellitero, V. Meana

Optics and Lasers in Engineering, 138, 2021

doi:10.1016/j.optlaseng.2020.106406

File download: optlas_2021_138_106406_[laser_line_sc_slm_parts][page_1].pdf

Layer Contour Verification in Additive Manufacturing by Means of Commercial Flatbed Scanners

D. Blanco, P. Fernández, A. Noriega, B. J. Álvarez, G. Valiño

Sensors, 20(1), 2020

doi:10.3390/s20010001

Category:JCR

Related Project:DPI2017-83068-P

File download: sensors_2020_20_1_[layer_contour_verif_am][page_1].pdf

Analysis of post-processing influence on the geometrical and dimensional accuracy of selective laser melting parts

E. Cuesta, B. J. Álvarez, P. Zapico, S. Giganto

Rapid Prototyping Journal, 26(10), pp. 1713-1722, 2020

doi:10.1108/RPJ-02-2020-0042

File download: rapidprotyp_2020_26_1713-1722_[geo_and_dim_accuracy_of_slm_p
arts][page_1].pdf

Dimensional and Geometrical Quality Enhancement in Additively Manufactured Parts: Systematic Framework and A Case Study

N. Beltrán, D. Blanco, B. J. Álvarez, A. Noriega, P. Fernández

Materials, 12, 3937, 2019

doi:10.3390/ma12233937

Category:JCR

Related Project:DPI2017-83068-P

File download: materials_2019_12_3937_[d&g_quality_in_am_parts][page_1].pdf

Metrological evaluation of laser scanner integrated with measuring arm using optical feature-based gauge

E. Cuesta, B.J. Alvarez, S. Martinez-Pellitero, J. Barreiro, H. Patiño

Optics and Lasers in Engineering, 121, 120-132, 2019

doi:10.1016/j.optlaseng.2019.04.007

Category: JCR

File download: 2019_metrological_evaluation_of_laser_[cuesta].pdf

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

E. Cuesta, A. Gesto, B. J. Álvarez, S. Martínez-Pellitero, P. Zapico, S. Giganto

Procedia Manufacturing, 41, pp. 2-9, 2019

doi:10.1016/j.promfg.2019.07.022

File download: procmanuf_2019_41_2-9_[dim_accuracy_direct_metal_printing][p
age_1].pdf

Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF

G. Valiño; J. C. Rico; P. Fernández; Braulio J. Álvarez; Y. Fernández

Procedia Manufacturing, 41, pp.129-136, 2019

doi:10.1016/j.promfg.2019.07.038

Related Project:DPI2017-83068-P

File download: procmanuf_2019_41_129-136_[capability_of_ch_for_thickness_pl
a_parts][page_1].pdf

CNC centralized control for digitizing freeform surfaces by means of a conoscopic holography sensor integrated in a machining centre

P. Zapico; H. Patiño; G. Valiño; P. Fernández; J.C. Rico

Precision Engineering (ISSN: 0141-6359); 55, pp. 474-483, 2018

doi:10.1016/j.precisioneng.2018.11.001

Category:JCR

Related Project:DPI2012-30987

File download: preeng_2019_55_474-483_[cnc_centralized_control][page_1]_60f
e.pdf

New procedure for qualification of structured light 3D scanners using an optical feature-based gauge

S. Martinez-Pellitero; E. Cuesta; S. Giganto; J. Barreiro

Optics and Laser in Engineering. Elsevier, 110, 193-206, 2018

doi:10.1016/j.optlaseng.2018.06.002

Category: JCR

File download: 2018_new_procedure_for_qualification_[pellitero].pdf

A Gaussian filtering method to reduce directionality on high-density point clouds digitized by a conoscopic holography sensor

H. Patiño; P. Zapico; J.C. Rico; P. Fernández; G. Valiño

Precision Engineering (ISSN: 0141-6359); 54, pp. 91-98, 2018

doi:10.1016/j.precisioneng.2018.05.005

Category:JCR

Related Project:DPI2012-30987

File download: preeng_2018_54_91-98_[gaussian_filtering][page_1].pdf

Knowledge base model for automatic probe orientation and configuration planning with CMMs

S. Martinez-Pellitero; J. Barreiro; A.I. Fernandez-Abia; E. Cuesta

Robotics and Computer-Integrated Manufacturing, 49, 285-300, 2018

Category:JCR

doi:10.1016/j.rcim.2017.08.012

File download: 2018_knowledge_base_model_for_automatic_[pellitero].pdf

Extrinsic calibration of a conoscopic holography system integrated in a CMM

P. Zapico; P. Fernández; J.C. Rico; G. Valiño; H. Patiño

Precision Engineering (ISSN: 0141-6359); 52, pp. 484-493, 2018

doi:10.1016/j.precisioneng.2017.12.007

Category:JCR

Related Project:DPI2012-30987

File download: preeng_2018_52_484-493_[extrinsic_calibraion][page_1].pdf

Conoscopic Holography Systematic Error Processing by Means of Gaussian Filters

P. Zapico; H. Patiño; P. Fernández; G. Valiño; J.C. Rico

Procedia Manufacturing (ISSN: 2351-9789); 13, pp. 426-433, 2017

doi:10.1016/j.promfg.2017.09.040

Related Project:DPI2012-30987

File download: promfg_2017_13_426-433_[page_1].pdf

Cutting-tool wear characterization by means of conoscopic holography

P. Zapico; D. Blanco; C. Cuervo; G. Valiño; J.C. Rico

Procedia Manufacturing (ISSN: 2351-9789); 13, pp. 13-20, 2017

doi:10.1016/j.promfg.2017.09.003

Related Project:DPI2012-30987

File download: promfg_2017_13_13-20_[page_1].pdf

Influence of Scanning Strategies on Measuring and Surface Digitizing by Means of a Conoscopic Holography Sensor Integrated in a Machining Centre

G. Valiño; J. C. Rico; P. Zapico; P. Fernández.

International Journal of Mechatronics and Manufacturing Systems (ISSN print: 1753-1039) (ISSN online: 1753-1047); 10 (2), pp. 167-183, 2017.

doi:10.1504/IJMMS.2017.10005772

Related Project:DPI2012-30987

File download: injmech_2017_10_167-183[page_1].pdf

Measurement and correction of the slope angle of flat surfaces digitized by a conoscopic holography system

G. Valiño, P. Zapico, P. Fernández, J.C. Rico, S. Mateos, D. Blanco.

Precision Engineering (ISSN: 0141-6359); 46, pp. 369-376, 2016.

doi:10.1016/j.precisioneng.2016.06.006

Category:JCR

Related Project:DPI2012-30987

File download: preeng_2016_46_369-376_[ch_slope_angle][page_1].pdf

Testing Coordinate Measuring Arms with a geometric feature-based gauge: In-situ field trials

E. Cuesta, B.J. Alvarez, H. Patiño, A. Telenti, J. Barreiro

IOP Conf. Series: Measurement Science and Technology, 27(5), 055003, 2016

doi:10.1088/0957-0233/27/5/055003

File download: 2016_testing_coordinate_measurement_[cuesta].pdf

Adjustment recommendations of a Conoscopic Holography sensor for a reliable scanning of surfaces with roughness grades obtained by different processes

J. C. Rico, G. Valiño, P. Fernández, P. Zapico, D. Blanco, S. Mateos.

Precision Engineering (ISSN: 0141-6359); 42, pp. 335-345, 2015

doi:10.1016/j.precisioneng.2015.04.011

Category:JCR

Related Project:DPI2012-30987

File download: preeng_2015_42_335-345_[ch_roughness][page1].pdf

Influence of part material and sensor adjustment on the quality of digitized point-clouds using conoscopic holography

D. Blanco, G. Valiño, P. Fernández, J. C. Rico, S. Mateos.

Precision Engineering (ISSN: 0141-6359), 42, pp. 42-45, 2015

doi:10.1016/j.precisioneng.2015.03.008

Category:JCR

Related Project:DPI2012-30987

File download: preeng_2015_42_42-52_[ch_materials][page_1].pdf

Influence of Surface Location within Depth of Field on Measuring by a Conoscopic Holography Sensor Integrated in a Machining Centre

G. Valiño, J.C. Rico, P. Zapico, P. Fernández, S. Mateos.

Procedia Engineering (ISSN: 1877-7058), 132, pp. 832-839, 2015

doi:10.1016/j.proeng.2015.12.567

Related Project:DPI2012-30987

File download: proceng_2015_132_832-839_[ch_dof_in_mc]-page_1.pdf

KBE rules oriented to resources management in coordinates inspection by contact

J. Barreiro; S. Martínez-Pellitero; E. Cuesta; A.I. Fernández-Abia

Journal of Manufacturing Systems, 37, 149-163, 2015

doi:10.1016/j.jmsy.2015.07.005

Category:JCR

File download: 2015_kbe_rules_oriented_to_resources_[pellitero].pdf

A Comparison between Discrete and Continuous Scanning with Conoscopic Holography

P. Zapico, P. Fernández, D. Blanco, G. Valiño, J.C. Rico.

Procedia Engineering (ISSN: 1877-7058), 132, pp. 840-847, 2015.

doi:10.1016/j.proeng.2015.12.568

Related Project:DPI2012-30987

File download: proceng_2015_132_840-847_[ch_discrete_vs_continuous_scanning
]_page_1_5704.pdf

Sensor Prototype to Evaluate the Contact Force in Measuring with Coordinate Measuring Arms

E. Cuesta; A. Telenti; H. Patiño; D. Gonzalez-Madruga; S. Martinez-Pellitero

Sensors, 15(6), 13242-13257, 2015

doi:10.3390/s150613242

Category: JCR

File download: 2015_sensor_prototyping_to_evaluate_[cuesta].pdf

Influence of Surface Position along the Working Range of Conoscopic Holography Sensors on Dimensional Verification of AISI 316 Wire EDM Machined Surfaces

P. Fernández, D. Blanco, J. C. Rico, G. Valiño, S. Mateos.

Sensors (ISSN: 1424-8220), 14(3), pp. 4495-4512, 2014

Category:JCR

Related Project:DPI2012-30987

File download: sensors_14_2014_04495-04512_[page_1].pdf

Influence of Human factor in the AACMM performance: a new evaluation methodology

D. Gonzalez-Madruga; J. Barreiro; E. Cuesta; S. Martinez-Pellitero

International Journal of Precision Engineering and Manufacturing, 15(7), 1283-1291, 2014

doi:10.1007/s12541-014-0468-9

Category: JCR

File download: 2014_influence_of_human_factor_in_the_aacmm_[gonzalez].pdf

Influence of Roughness on Conoscopic Holography Digitizing of DIN34CrMo4 Surfaces

D. Blanco, G. Valiño, P. Fernández, J. C. Rico, S. Palomo.

Procedia Engineering (ISSN: 1877-7058), 63, pp. 472-480, 2013

Related Project:DPI2012-30987

File download: proceng_2013_63_472-480_[ch_roughness][page_1].pdf

Proceedings

Analysis of printing parameters for sheet metal bending with FDM printed tools

P. Rodríguez-González, P. Zapico, L. Llamas-Fernández, S. Peláez-Peláez, A.I. Fernández-Abia

10th Manufacturing Engineering Society International Conference (MESIC2023)

Sevilla (Spain), 28-30 June 2023

File download: abstract_-mesic2023_-_3.pdf

Characterisation of the performance of a structural light digitizing sensor by using different materials and surface finishes

P. Zapico; E. Cuesta; V.M. Meana; G. Suárez; S. Mateos; P. Rodríguez

10th Manufacturing Engineering Society International Conference (MESIC2023)

Sevilla (Spain), 28-30 June 2023

File download: abstract_mesic2023_-_4.pdf

Using PETG/rPET blends in Fused Particle Fabrication: Analysis of Feasibility and Mechanical Behaviour

P. Fernández; R. Marqués; N. Beltrán; B. Puerto; D. Blanco

10th Manufacturing Engineering Society International Conference (MESIC2023)

Sevilla (Spain), 28-30 June 2023

File download: abstract_-_mesic2023_-_1.pdf

On-machine CIS SoC-based layerwise inspection system for MEX additive manufacturing

A. Fernández; P. Fernández; F. Peña; G. Valiño; D. Blanco

10th Manufacturing Engineering Society International Conference (MESIC2023)

Sevilla (Spain), 28-30 June 2023

File download: abstract_-_mesic2023_-_2.pdf

Digitization Methods of Grinding Pins for Technological Process Planning

R. Wdowik; R.M. Chandima Ratnayake; M. Żółkoś; M. Magdziak; G. Valiño; B.J. Alvarez; J. Misiura

30th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2021)

Athens (Greece), 15-18 June 2021

File download: 2020_digitization_methods_of_grinding_[wdowik].pdf

Detección de contornos a partir de nubes de puntos en piezas obtenidas mediante Fabricación Aditiva

P. Zapico, F. Peña, G. Valiño, J.C. Rico

XV Congreso Iberoamericano de Ingeniería Mecánica,

Madrid (Spain), 22-24 November 2022

Related Project: DPI2017-83068-P

File download: cibim_2022_deteccioncontornos.pdf

Multi-Sensor Measurement for In-Situ Defect Identification in Metal Laser Powder Bed Fusion

A. Remani; R. Williams; A. Rossi; F. Peña; A. Thompson; J. Dardis; N. Jones; P. Hooper; N. Senin; R. Leach

2022 Summer Topical Meeting - Advancing Precision in Additive Manufacturing. American Society for Precision Engineering

Tennessee (USA), 11-14 July 2022

Related Project:DPI2017-83068-P

Feasibility analysis of using machinable glass ceramics to manufacture non-contact measurement approach metrological artefacts

P. Zapico, B. Alvarez, V. Meana, A. Telenti, E. Cuesta

9th Manufacturing Engineering Society International Conference (MESIC2021). Book of Abstracts,

(Digital ISBN: 978-84-09-29229-5)

Edit.: J.C. Rico, E. Cuesta, G. Valiño, V. Meana, P. Fernández

Gijón (Spain), 2021

File download: feasibility_analysis_of_using_machinable_glass_ceramics.pdf

Validation of the Sandblasting Process in the Manufacturing of Precision Spheres for Non-Contact Metrology

E. Cuesta, V. Meana,P.

Pastur, B. Álvarez, P. Zapico

9th Manufacturing Engineering Society International Conference (MESIC2021). Book of Abstracts,

(Digital ISBN: 978-84-09-29229-5)

Edit.: J.C. Rico, E. Cuesta, G. Valiño, V. Meana, P. Fernández

Gijón (Spain), 2021

File download: validation_of_the_sandblasting_process.pdf

Layer contour characterization in additive manufacturing through image binarization

D. Blanco, A. Fernández, P. Fernández, B. J. Álvarez, F. Peña

9th Manufacturing Engineering Society International Conference (MESIC2021). Book of Abstracts,

(Digital ISBN: 978-84-09-29229-5)

Edit.: J.C. Rico, E. Cuesta, G. Valiño, V. Meana, P. Fernández

Gijón (Spain), 2021

Related Project:DPI2017-83068-P

File download: layer_contour_characterization_in_am.pdf

Contact Image Sensor integration in Fused Filament Fabrication machines for layer inspection

F. Peña; J. C. Rico; G. Valiño; P. Fernández; V. Meana; P. Zapico

9th Manufacturing Engineering Society International Conference (MESIC2021). Book of Abstracts

(Digital ISBN: 978-84-09-29229-5)

Edit.: J.C. Rico, E. Cuesta, G. Valiño, V. Meana, P. Fernández

Gijón (Spain), 2021

Related Project:DPI2017-83068-P

File download: cis_sensor_integration_in_fff_machines.pdf

Conoscopic Holography feasibility for form error in-situ monitoring in Additive Manufacturing

F. Peña; A. Fernández; P. Zapico; G. Valiño; J.C. Rico

10th IFAC Conference on Manufacturing Modelling, Management and Control. International Federation of Automation Control

Nantes (France), June 2022

Related Project:DPI2017-83068-P

Design and construction of a test bench for the manufacturing and on-machine non-contact inspection of parts obtained by Fused Filament Fabrication

F. Peña; C. Fernández; G. Valiño; B. J. Álvarez; J. C. Rico; S. Mateos

9th Manufacturing Engineering Society International Conference (MESIC2021). Book of Abstracts

(Digital ISBN: 978-84-09-29229-5)

Edit.: J.C. Rico, E. Cuesta, G. Valiño, V. Meana, P. Fernández

Gijón (Spain), 2021

Related Project:DPI2017-83068-P

File download: design_and_construction_test_bench_for_fff.pdf

Failure Analysis of Bi-Material FFF Parts

P. Fernández; P. Fernández; D. Ávila; N. Beltrán; D. Blanco

8th Manufacturing Engineering Society International Conference (MESIC2019). Book of Abstracts

Edit.: C. Barajas, J. Caja, R. Calvo, P. Maresca, T. Palacios

Madrid (Spain), 2019

Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF

G. Valiño; J. C. Rico; P. Fernández; Braulio J. Álvarez; Y. Fernández

8th Manufacturing Engineering Society International Conference (MESIC2019). Book of Abstracts

(Digital ISBN: 978-84-09-10387-4)

Edit.: C. Barajas, J. Caja, R. Calvo, P. Maresca, T. Palacios

Madrid (Spain), 2019

Related Project:DPI2017-83068-P

File download: capability_of_ch_for_am.pdf

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

E. Cuesta, A. Gesto, B. J. Álvarez, S. Martínez-Pellitero, P. Zapico, S. Giganto

8th Manufacturing Engineering Society International Conference (MESIC2019). Book of Abstracts

(Digital ISBN: 978-84-09-10387-4)

Edit.: C. Barajas, J. Caja, R. Calvo, P. Maresca, T. Palacios

Madrid (Spain), 2019

File download: dimensional_accuracy_of_dmp_machine.pdf

Conoscopic holography systematic error processing by means of Gaussian filters

Zapico, P.; Patiño, H.; Fernández, P.; Valiño, G.; Rico, J.C.

7th Manufacturing Engineering Society International Conference (MESIC2017). Book of Abstracts

(Digital ISBN: 978-84-697-3077-5)

Edit.: J.E. Area, J. Salgueiro, F.J. Fernández, G. Peláez

Vigo (Spain), 2017

Related Project:DPI2012-30987

File download: ch_systematc_error_gaussian_filter.pdf

Cutting-tool wear characterization by means of conoscopic holography

Zapico, P.; Blanco, D.; Cuervo, C.; Valiño, G.; Rico, J.C.

7th Manufacturing Engineering Society International Conference (MESIC2017). Book of Abstracts,

(Digital ISBN: 978-84-697-3077-5)

Edit.: J.E. Area, J. Salgueiro, F.J. Fernández, G. Peláez

Vigo (Spain), 2017

Related Project:DPI2012-30987

File download: cutting_tool_wear-chracterization.pdf

Influence of surface location within depth of field on measuring by a conoscopic holography sensor integrated in a machining centre

G. Valiño, J. C. Rico, P. Zapico, P. Fernández, S. Mateos.

6th Manufacturing Engineering Society International Conference (MESIC2015). Book of Abstracts, ISBN: 978-84-608-1280-7 (print), ISBN: 978-84-1568863-1 (digital)

Edit.: M.A. Rosendo, G. Puig, I. Buj, J. Minguella

Barcelona (Spain), 2015

Related Project:DPI2012-30987

File download: influence_of_surface_location_within_depth_of_field_on.pdf

A comparison between discrete and continuous scanning with conoscopic holography

P. Zapico, P. Fernández, D. Blanco, G. Valiño, J. C. Rico. 6th Manufacturing Engineering Society International Conference (MESIC2015). Book of Abstracts, ISBN: 978-84-608-1280-7 (print), ISBN: 978-84-1568863-1 (digital)

Edit.: M.A. Rosendo, G. Puig, I. Buj, J. Minguella

Barcelona (Spain), 2015

Related Project:DPI2012-30987

File download: a_comparison_between_discrete_and_continuous_55b6.pdf

Influence of Filtering upon Precision and Trueness in Conoscopic Holography

D. Blanco, P. Fernández, P. Zapico, N. Beltrán, C. Suárez.

World Congress on Engineering 2014 (WCE 2014). Lecture Notes in Engineering and Computer Science (ISBN 978-988-9253-5-0, ISSN: 2078-0958), Vol. 2, pp. 946-951

Edit.: International Association of Engineers (IAENG)

London (UK), 2014

Online Full Text

Related Project:DPI2012-30987

Non-contact Measurement of Surface Roughness by Conoscopic Holography Systems

S. Mateos, G. Valiño, P. Zapico, P. Fernández, J. C. Rico.

World Congress on Engineering 2014 (WCE 2014). Lecture Notes in Engineering and Computer Science (ISBN 978-988-9253-5-0, ISSN: 2078-0958), Vol. 2, pp. 1162-1167

Edit.: International Association of Engineers (IAENG)

London (UK), 2014

Online Full Text

Related Project:DPI2012-30987

Influence of Roughness on Conoscopic Holography Digitizing of DIN34CrMo4 Surfaces

D. Blanco, G. Valiño, P. Fernández, J. C. Rico, S. Palomo.

Manufacturing Engineering Society International Conference (MESIC 5th)

Book of Abstracts (ISBN: 978-84-1568863-1).

CD-ROM of Proceedings (ISBN: 978-84-1568864-8).

Edit.: J.J. Aguilar, J.A. Yagüe, J. Santolaria y J.A. Albajez

Zaragoza (Spain), 2013

Related Project:DPI2012-30987

File download: paginas_desdech_roughness_[mesic_2013][zaragoza][page_1].pdf

Others

Manufacture of replicas: 3D digitizing and additive manufacturing

Course organized by the Office for University Extension and Communication (University of Oviedo)

D. Blanco, P. Fernández and N. Beltrán

14-18, July, 2014 (45 hours)

Non-contact digitizing of mechanical components. Photogrammetry and Laser

Course at the Integrated Centre of Professional Training (CIFP-Universidad Laboral Gijón, Spain)

D. Blanco

January 2014 (25 hours)